NXSL:Node

Represents NetXMS node object.

Class Name

Node

Attributes

Name	Type	Description
agentVersion	string	NetXMS agent's version
bootTime	int64	Node boot time or 0 if not known (in seconds since epoch)
comments	string	Object's comments
driver	string	Driver name
flags	uint32	Node flags (bit mask)
guid	string	Object's GUID
id	uint32	Object's identifier
ipAddr	string	Primary IP address
is802_1x	boolean	TRUE if node supports 802.1x
isAgent	boolean	TRUE if NetXMS agent detected on node
isBridge	boolean	TRUE if node is a bridge
isCDP	boolean	TRUE if node supports CDP (Cisco Discovery Protocol)
isLLDP	boolean	TRUE if node supports LLDP (Link Layer Discovery Protocol)
isLocalMgmt	boolean	TRUE if node is a local management server (NetXMS server)
isPAE	boolean	TRUE if node supports 802.1x
isPrinter	boolean	TRUE if node is a printer
isRouter	boolean	TRUE if node is a router (has IP forwarding enabled)
isSNMP	boolean	TRUE if SNMP agent detected on node
isSONMP	boolean	TRUE if node supports SONMP/NDP (Synoptics/Nortel Discovery Protocol)
name	string	Object name
platformName	string	Platform name reported by NetXMS agent
runtimeFlags	uint32	Node runtime flags (bit mask)
snmpOID	string	SNMP object identifier (value of .1.3.6.1.2.1.1.2.0)
snmpSysName	string	SNMP system name (value of .1.3.6.1.2.1.1.5.0)
snmpVersion	int32	Configured SNMP version (0 for SNMP version 1, 1 for SNMP version 2c, 2 for SNMP version 3)
status	int32	Object status
sysDescription	string	SNMP system description (value of .1.3.6.1.2.1.1.1.0)
zone	object (Zone)	Zone object (null if zoning is disabled)
zoneId	int32	Zone ID (0 if zoning is disabled)

Methods enableAgent enableConfigurationPolling enableIcmp enableSnmp enableStatusPolling enableTopologyPolling