NXSL:Node
Jump to navigation
Jump to search
Represents NetXMS node object.
Class Name
Node
Attributes
| Name | Type | Description |
|---|---|---|
| agentVersion | string | NetXMS agent's version |
| bootTime | int64 | Node boot time or 0 if not known (in seconds since epoch) |
| bridgeBaseAddress | string | Bridge base address (will return "000000000000" if not known or node is not a bridge/switch) |
| comments | string | Object's comments |
| driver | string | Driver name |
| flags | uint32 | Node flags (bit mask) |
| guid | string | Object's GUID |
| id | uint32 | Object's identifier |
| ipAddr | string | Primary IP address |
| is802_1x | boolean | TRUE if node supports 802.1x |
| isAgent | boolean | TRUE if NetXMS agent detected on node |
| isBridge | boolean | TRUE if node is a bridge |
| isCDP | boolean | TRUE if node supports CDP (Cisco Discovery Protocol) |
| isLLDP | boolean | TRUE if node supports LLDP (Link Layer Discovery Protocol) |
| isLocalMgmt | boolean | TRUE if node is a local management server (NetXMS server) |
| isPAE | boolean | TRUE if node supports 802.1x |
| isPrinter | boolean | TRUE if node is a printer |
| isRouter | boolean | TRUE if node is a router (has IP forwarding enabled) |
| isSNMP | boolean | TRUE if SNMP agent detected on node |
| isSONMP | boolean | TRUE if node supports SONMP/NDP (Synoptics/Nortel Discovery Protocol) |
| name | string | Object name |
| platformName | string | Platform name reported by NetXMS agent |
| runtimeFlags | uint32 | Node runtime flags (bit mask) |
| snmpOID | string | SNMP object identifier (value of .1.3.6.1.2.1.1.2.0) |
| snmpSysContact | string | SNMP system contact (value of .1.3.6.1.2.1.1.4.0) |
| snmpSysDescription | string | SNMP system description (value of .1.3.6.1.2.1.1.1.0) |
| snmpSysLocation | string | SNMP system location (value of .1.3.6.1.2.1.1.6.0) |
| snmpSysName | string | SNMP system name (value of .1.3.6.1.2.1.1.5.0) |
| snmpVersion | int32 | Configured SNMP version (0 for SNMP version 1, 1 for SNMP version 2c, 2 for SNMP version 3) |
| status | int32 | Object status |
| zone | object (Zone) | Zone object (null if zoning is disabled) |
| zoneId | int32 | Zone ID (0 if zoning is disabled) |
Methods
| Name | Description |
|---|---|
| enableAgent(boolean) | Enable or disable usage of NetXMS agent for all polls |
| enableConfigurationPolling(boolean) | Enable or disable configuration polling for a node |
| enableIcmp(boolean) | Enable or disable usage of ICMP pings for status polls |
| enableSnmp(boolean) | Enable or disable usage of SNMP for all polls |
| enableStatusPolling(boolean) | Enable or disable status polling for a node |
| enableTopologyPolling(boolean) | Enable or disable topology polling |
Example (disable usage of NetXMS agent for all polls):
$node->enableAgent(false);