NXSL:Interface

Represents interface object.

Class Name

Interface

Attributes

Name	Type	Description
adminState	int32	Administrative state
bridgePortNumber	uint32	Bridge port number for this interface
comments	string	Comments
description	string	Interface description
dot1xPaeAuthState	int32	802.1x PAE authentication state
dot1xBackendAuthState	int32	802.1x back-end authentication state
expectedState	int32	Interface expected state. Possible values are 0 (up), 1 (down), and 2 (ignore).
flags	uint32	Interface flags (bit mask)
guid	string	Object's GUID
id	uint32	Object's identifier
ifIndex	int32	Interface index
ifType	int32	Interface type
isExcludedFromTopology	boolean	TRUE if this interface excluded from network topology
isLoopback	boolean	TRUE if this interface is a loopback
isManuallyCreated	boolean	TRUE if this interface object was created manually by NetXMS administrator
isPhysicalPort	boolean	TRUE if this interface object represents physical port
ipAddr	string	IP address
ipNetMask	string	IP network mask
macAddr	string	MAC address
name	string	Object name
node	object (Node)	Parent node object
operState	int32	Operational state
peerInterface	object (Interface)	Peer interface object if known, otherwise null
peerNode	object (Node)	Peer node object if known, otherwise null
port	int32	Port number
slot	int32	Slot number
status	int32	Object status
zone	object (Zone)	Zone object (null if zoning is disabled)
zoneId	int32	Zone ID (0 if zoning is disabled)

Possible values for adminState and operState are following:

Value	Meaning
0	Unknown
1	Up
2	Down
3	Testing