Enable SNMP for devices without standard system MIB

From NetXMS Wiki
Revision as of 23:32, 3 July 2013 by Victor (talk | contribs) (Created page with "Initiated by this topic on forum: http://www.netxms.org/forum/general-support/problem-with-the-ethernetbox-from-messpc/ If device does not support standard system MIB (.1.3.6...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Initiated by this topic on forum: http://www.netxms.org/forum/general-support/problem-with-the-ethernetbox-from-messpc/

If device does not support standard system MIB (.1.3.6.1.2.1.1) NetXMS server will not recognize it as SNMP-capable. Starting with version 1.2.8, it is possible to set custom SNMP OID which server will use to test SNMP availability. Custom SNMP OID can be set via custom attribute named snmp.testoid. For example, for device mentioned in forum post above, setting snmp.testoid to .1.3.6.1.4.1.14848.2.1.1.1.0 should work.

Retrieved from "https://wiki.netxms.org/index.php?title=Enable_SNMP_for_devices_without_standard_system_MIB&oldid=1026"